|
|
Sponsors and Curators
The Museum of Yo-Yo History is a labor of love, and we would not be able to stay up-to-date with exhibits without the support of our sponsors and curators. Big thanks go to One Drop Design and Duncan for supplying us with their latest models, YoYoExpert for their help and support, and to Cody Orr, TotalArtist and YoYoBrothers™ for allowing us to use their collections!
If you're a manufacturer, or just a big collector and you want to help support the Museum drop me at line at chimera@yoyomuseum.com
|
|
|
|
|
|
|
Arc1 Gemstones 2022 (mini) |
Exhibit #4554 |
|
|
Type | Production |
Shape | Concave )-( |
Axle | Bearing |
Finish | Anodized |
Color | Black/Clear |
Packaging | Boxed |
Construction | Composite |
Response | CBC Slim Pad |
Diameter | 40mm |
Width | 40mm |
Gap | Fixed |
Weight | 60gm |
Condition | Mint |
Date | 2022 |
Owner | Rick Brough |
Compare | |
|
|
The Gemstones by Arc1. Designed in the Netherlands; manufactured in China.
From yoyoexpert.com:
"Dan from Arc1 is on [yoyoexpert.com] forums and had the idea almost as long as he was first in the yo-yo scene back in 2019. He set out to design something special and unique that hadn’t been done before. His design first approached the shape from a looks perspective rather than a performance first approach. The yoyo itself got its shape from the outline you would get when you let two brilliant cut gemstones meet at their culet and this is also the reason why he decided to go for the plural of gemstone as the name.
With the rough concept in his head he went searching for a CAD designer to help him which led to Mark Diehr of Mk1 yo-yos. Mark helped him turn the idea all the way from a sketch into a prototype. He is also the one who came up with the spintop caps. A feature that made the Gemstones even more special and an absolute joy to play!
Playing the Gemstones
Playing the Gemstones is tons of fun. To be clear it is an undersized yoyo but despite its size it packs a punch with almost two thirds of its weight distributed in the steel rings. Its small size also makes it very pocket friendly. The polycarbonate body is not polished but fresh from the lathe which makes it grind friendly. Even though the yoyo comes with finger spin caps, it is actually easier to finger spin it without any caps on.
This is aided by the slightly funnel shaped hub design. However because the yoyo is designed for looks the finger spin caps are included to offer finger spin capabilities with a more refined aesthetic look.
The real fun of course begins when you install the spin top caps. These allow you to balance the yoyo as a spintop on the palm of your hand or on any flat surface you can find.
Changing the caps
The [three sets of] caps [that come with the yo-yo] are interchangeable. You can press fit them on by hand and you remove them with air pressure. For this reason, an air needle is provided with the yo-yo. Wind the tip of the needle with tape until it is thick enough to screw into the axle hole to create an airtight seal. Paper masking tape works best.
You also need a good modern bike pump or powerful air compressor that can generate roughly 12 BAR [174 PSI or 1200 kPa]. The caps will shoot out at a considerable force and with a loud bang so you must cover the yoyo with damping material like a blanket or between two bed pillows, and wear ear protection [and eye protection]. You also need to make sure the direction the cap shoots is not down. If you have the cap shooting down, the yo-yo will almost certainly get dinged by colliding with the cap.
Connect it to the pump or compressor, prepare for the bang and pump the air into it. If there are any air leaks between the pump and the yo-yo, there is a high chance you won’t be able to generate enough pressure. The finger spin caps especially need a lot of pressure to be removed.
Important Notes/Disclaimer:
The Gemstones is very much a piece of art. As such, Arc1 wanted to be clear that each one is a bit unique and although they set high standards for themselves there is some variation as described here:
• Visual – Because the polycarbonate parts are not polished or blasted some superficial machining and handling marks can be visible in the right light. Mostly on the flat of the black caps. The laser engraving is done on an angled steel surface. As a result the alignment can be off by a little bit on all colours. At some points the lines seem too thick under certain angles. This is mostly occurring in the silver ringed versions. Almost all the hubs in the black yoyos miss pin pricks of anodisation, probably due to the fitting technique.
• Vibe – Because of the many parts and materials used in the construction, all these yoyos have a very slight vibe, mostly noticeable on the nail when measured at the steel edge and during a finger spin. This does not affect play."
The yo-yo was released on September 24, 2022, 18:00 MST from yoyoexpert.com in the following body/ring configurations and associated production numbers:
• Frosted polycarbonate body/gold rings - 6
• Frosted polycarbonate body/silver rings - 6
• Frosted polycarbonate body/rainbow rings - 12
• Frosted polycarbonate body/black rings - 6 (seen in this exhibit)
• Black polycarbonate body/gold rings - 9
• Black polycarbonate body/silver rings - 6
• Black polycarbonate body/rainbow rings - 6
• Black polycarbonate body/black rings - 6
Recipe
Diameter: 40mm
Width: 40mm
Weight:
60gm - no caps
64gm - with flat or finger spin caps
65gm - with spintop caps
Bearing: Size D (5 × 11 × 5mm)
Response: Size 19mm OD (Outside Diameter), slim pads
Design: Netherlands
Manufacture: China
Original retail price: $120
Of interest...
To see all mini yo-yos in this museum, in the left panel, select Exhibits.
In the right pane, in the Name/Model field, type mini , then select Browse.
| |
| |
|
|
|
|
|
|
|
|
|
|
|
|